We are looking for Quality Control Inspector (Coating)
Duration: 03 Months Extendable (RasLaffan)
Valid Qid and Driving License with experience of Oil and Gas field

Experience: Min 5 + years
Ensures that protective coatings are applied properly to steel and concrete surfaces to prevent corrosion and structural failure
Cleanliness Inspection: Inspect steel or substrate surfaces for oil, grease, salt, dust, and mill scale before abrasive blasting.
Surface Profile (Anchor Pattern): Measure and record the anchor pattern roughness produced by blasting to ensure proper mechanical adhesion.
Abrasive & Air Quality: Monitor blast media cleanliness and compressed air purity (oil/moisture check)
Mixing & Induction: Supervise paint component mixing ratios, induction times, and pot life limits.
Wet & Dry Film Thickness (WFT / DFT): Measure WFT during application and DFT after curing to verify compliance with specification limits.
Intercoat & Recoat Intervals: Monitor Intercoat cleanliness, stripe coating, and adherence to minimum/maximum recoat windows.
Visual Defect Inspection: Check for application flaws like runs, sags, pinholes, blistering, cracking, dry spray, or delamination
certification requirements (such as NACE/AMPP or BGAS)
Candidates available on Short Notice can send CVS: [email protected]